Amplifiers

Reference Amplifiers & Pre-Amplifiers

Classé Delta Stereo

$12,999.00

Stereo Amp

Classé Delta Stereo Power Amplifier

The Delta STEREO distills all of Classé's innovation and knowledge into a compact high-performance stereo amplifier. In situations where dual mono amplifiers can't be accommodated, Delta STEREO offers uncompromising performance in a single component.

AMPLIFICATION

The first 12.5W of power output are pure Class A, and with a total of 250W per channel at its command (over 350W/Ch @ 2 Ohms ), this compact, powerful amplifier drives loudspeakers with utmost confidence.

Up to 12.5W per Channel delivered in pure Class A operation

250W per Channel total

Massive, high-quality power supply

Custom toroidal transformer

CLARITY

Delta STEREO delivers exceptional clarity. Every effort has been made to preserve complete separation between channels, delivering the natural, expansive sound that Class is legendary for.

Hand-laid circuit boards

6-layer circuit boards provide for shortened signal and power pathways with lowest noise

22 4-pole Mundorf capacitors

Custom-made Navcom feet to absorb vibrations

Furutech rhodium-plated RCA and torque-guard speaker connectors

DESIGN

Delta STEREO has presence. Its capabilities are expressed through design and it looks fantastic in any room or installation.

Superb material finishes and a pair of custom-designed illuminated VU meters display power output for both channels beautifully.

Delta Series design concept is to create a monument to sound. This amplifier looks every bit has capable as it sounds.

To learn more please contact us or visit https://www.classeaudio.com/products/delta-stereo/

Classé Delta Mono

$10,999.00

Mono Amp

Classé Delta Mono Power Amplifier (ea)

Delta MONO embodies exquisite, controlled, unending power.

A perfectly detailed enclosure cradles a highly innovative blend of technologies and hand-selected components which deliver effortless, refined sound.

AMPLIFICATION

Delta MONO is crafted for exceptional performance and durability every detail superbly refined. The first 35W of power are pure Class A, and with over 300W per unit total (1,000W @ 2 ) at its command, Delta MONO will confidently control any loudspeaker.

Up to 35W delivered in pure Class A operation

300W per unit total

Massive, high-quality power supply

Custom toroidal transformer

CLARITY

Delta MONO delivers the utmost clarity in everything you hear. Every detail communicates natural, authoritative sound. An expansive dynamic range with infinitesimal noise delivers unsurpassed fidelity to the musical source. Start listening.

Hand-laid circuit boards

6-layer circuit boards provide for shortened signal and power pathways with lowest noise

Fully balanced output stage and balanced circuitry

22 4-pole Mundorf capacitors

Custom-made Navcom feet to absorb vibrations

Furutech rhodium-plated RCA and torque-guard speaker connectors

DESIGN

Delta MONO continues Class s reputation for monumental design. The amplifier creates an immediate presence in any room or installation through its unique form and superb materials. The illuminated VU meter beautifully communicates output with elegance and detail. This is an amplifier that looks as iconic as it sounds.

Harmony between minimal design and unrivalled performance

Luxurious anodized aluminum body

Custom, illuminated VU meters

Perfectly complements other components in the Delta family

VERSATILITY

Thanks to the unique ICTunnel cooling technology, Delta MONO is stackable and rackable in a way no conventionally-cooled amplifier can match. Internal temperature is continuously monitored and controlled, ensuring performance in any configuration. Combined with Delta MONO s construction, ICTunnel supports a lifetime of unrivalled amplification performance.

Proprietary ICTunnel temperature regulation technology

Power-on to optimal temperature in minutes

Active sensing and regulation of optimal amplifier temperature

Low-noise operation suitable for studio applications

To learn more please contact us or visit https://www.classeaudio.com/products/delta-mono/

Classé Pre

$9,999.00

PreAmp

Classé Delta Pre Preamplifier with DAC

The Delta PRE is the foundation of your perfect system. Designed to connect to a range of sources, the PRE will exact the highest performance from every recording, whether analog or digital.

Delta PRE will deliver perfectly balanced audio to downstream Delta components.

FIDELITY

Delta PRE is the foundation of your perfect system.

Designed to connect to a range of sources, Delta PRE will extract the highest performance from every recording, whether analog or digital.

Pre-amplifiers provide clean and controlled signals to the power stage. Both precision and perfection are required, and are delivered by Delta PRE.

Network, USB, AES/EBU, coax and optical inputs with optional HDMI

XLR and RCA inputs

Short signal paths to minimise signal interference

Custom-made Navcom feet absorb and reduce vibrations

High-performance onboard MC/MM Phono stage supports up to two phono inputs

Rhodium-plated connectors for excellent and secure contacts

CONTROL

Audiophiles, recording professionals and equipment reviewers trust Class amplifiers as a source of sonic truth. Delta Series allows listeners to experience that truth in their own homes.

Every detail of the Delta Series is perfected by hand in our unique production facility in Japan to deliver powerful, natural, expansive sound with minimal noise or distortion.

0.25dB volume step precision to find your perfect sound level

Digital domain tone control with Delta PRE Tilt control

Support for mono or stereo subwoofers for better control of bass

Selectable frequency and slope control

Advanced five-band digital domain parametric equalization

Digital bypass mode available to all analog sources

Pass thru mode

DESIGN

As the component you re most likely to touch, the design of Delta PRE matches its exceptional acoustic performance.

Any interacting with Delta PRE is pure pleasure, from the superb cool-to-the-touch materials, to the precise tactile feedback of the volume control.

Touchscreen control reflects Delta PRE s outstanding capability : pure analog clarity, advanced digital precision, confident, capable power and expressive sound.

Harmony between minimal design and unrivalled performance

Luxurious anodized aluminum body

Adjustable brightness, responsive touchscreen display

Perfectly complements other components in the Delta family

To learn more please contact us or visit https://www.classeaudio.com/products/delta-pre/

Parasound JC 1+

$8,495.00

Mono Amp

Specifications:

John Curl Reference Mono Power Amplifier, 4U

Power Output:

450 x1 watts @ 8 Ω
850 x1 watts @ 4 Ω
1300 x1 watts @ 2 Ω

Frequency Response:

2 Hz - 120 kHz, +0/-2 dB
20 Hz - 20 kHz, +0/-0.25 dB

Input Impedance:

Unbalanced: 50 kΩ
Balanced: 100 kΩ, (50 kΩ per leg)

Power Requirement:

Standby: <1 Watt
Idle (bias set to low): 145 Watts
Idle (bias set to high): 275 Watts
Typical Listening levels: 400 Watts
Maximum: 1500 Watts

Dimensions

Height without feet: 7-1/8" (181 mm)
Height with feet: 7-3/4" (197 mm)
Depth: 20" (508 mm)
Depth with cables: 21-1/2" (546 mm)

Net Weight

83 lb. (37.6 kg)

To learn more please contact us or visit https://parasound.com/jc1+.php

Parasound JC 5

$5,995.00

2 Ch Stereo Amp

Power Output – Both Channels Driven

400 watts x 2, 8 Ω
600 watts x 2, 4 Ω

Power Output – Bridged Mode

1200 watts x 1, 8 Ω
Bridged 4 Ω operation is not recommended

Power measurement parameters are at 120 VAC:

0.05% THD, RMS continuous power,
full audio band (20 Hz - 20 kHz

Current Capacity

90 amps peak, per channel

Slew Rate

> 130 volts per microsecond

Frequency Response

5 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.25 dB Total Harmonic Distortion (THD)
< 0.05 % at full power
< 0.03 % at typical listening levels IM Distortion
< 0.04 %

TIM

Unmeasurable

Inter-channel Crosstalk

> 87 dB at 1 kHz
> 72 dB at 20 kHz

Input Impedance

Unbalanced: 33 kΩ
Balanced: 66 kΩ,(33 kΩ per leg)

Total Gain

29 dB

Input Sensitivity for 28.28 V Output into 8 Ω

Unbalanced: 1 V
Balanced: 1 V per leg

S/N Ratio

> 116 dB, input shorted, IHF A-weighted
> 111 dB, input shorted, unweighted Damping Factor
1000 at 20 Hz DC Trigger Requirements
+9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirements

2 mV - 10 mV

XLR Pin Identification

1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Dimensions

Width: 17-5⁄8"
Height without feet: 7-1⁄8"
Height with feet: 7-3/4"
Depth: 20"
Depth with cables: 21-1⁄2"

Net Weight

73 lb.

Shipping Weight

90 lb.

Power Requirement

Standby: 1 Watt
Idle (no music playing): 225 Watts
Typical listening levels: 400 Watts
Maximum: 1500 Watts

To learn more please contact us or visit https://parasound.com/jc5.php

Parasound JC 2 BP

$4,495.00

2 Ch PreAmp

Frequency Response

5 Hz - 100 kHz, +0/-3 dB

Distortion

THD: < 0.003% at 100 Hz
THD: < 0.005% at 20 kHz
IM: < 0.003%

S/N Ratio

> 116 dB, input shorted, IHF A-weighted
> 104 dB, input shorted, unweighted

Crosstalk

> 100 dB at 10 kHz
> 90 dB at 20 kHz

Gain

14 dB, maximum

L, R Gain Control Range

- 10 dB

Input Impedance

Unbalanced: 30k ohms
Balanced: 30k ohms per leg

Output Impedance

Unbalanced: < 60 ohms
Balanced: < 60 ohms per leg

Input Sensitivity

200 mV for 1 V output
Total Gain: 14 dB
Maximum Output: 8 V

XLR Pin Identification

1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

AC Power Requirement

110 - 120 V or 220-240 V, 50 - 60 Hzs
(Set AC Voltage switch on rear panel)
25 watt standby; 30 watts when turned on

Dimensions

Width: 17 1/4"
Depth: 16"
Height, with feet: 5 7/8"
Height, without feet: 5 1/4"

Weight

Net: 24 lbs.
Shipping: 36 lbs.

Rack Mount Accessory

HRA 3 (May be purchased separately)

To learn more please contact us or visit https://parasound.com/jc2bp.php

Parasound JC 3+

$2,995.00

3 Ch Phono PreAmp

John Curl Reference Phono Preamp, Dual Mono Design, Variable MC Load Adjustment, Mono Switch, 2U

Frequency Response

20 Hz - 20 kHz, +/- 0.2 dB

Total Harmonic Distortion

< 0.01% at 1 kHz

Signal to Noise Ratio, MM

> 87 dB, input shorted, IHF A-weighted
> 78 dB, input shorted, unweighted Signal to Noise Ratio, MC
> 87 dB, input shorted, IHF A-weighted
> 67 dB, input shorted, unweighted

Interchannel Crosstalk

72 dB at 1 kHz

Input Impedance

MM: 47k Ω
MC: 50 - 550 Ω variable, 47k Ω fixed

Output Impedance

Unbalanced: < 100 Ω
Balanced: < 100 Ω per leg

Input Capacitance

150 pF

Input Sensitivity at 1 kHz

MM: 4mV for 1 V output
MC: 600µV for 1 V output

Total Gain

MM: 48 dB
MC: 64 dB

XLR Pin Identification

1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

AC Power Requirement

Standby: 1 watt
Power On: 12 watts
115 or 230 VAC 50 - 60 Hz

(Selected on Chassis Bottom)

Dimensions

Width: 17-1/4"
Depth: 13-3/4"
Height, with feet: 4-1/8"
Height, without feet: 3-1/2"

Weight

Net: 19 lbs.
Shipping: 26 lbs.

Rack Mount Accessory

HRA 2 (may be purchased separately)

To learn more please contact us or visit https://parasound.com/jc3+.php

Parasound P 6

$1,595.00

2.1 Ch PreAmp

Frequency Response

10 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.5 dB

Total Harmonic Distortion (THD)

< 0.01 %

Interchannel Crosstalk

> 70 dB at 20 kHz
> 78 dB at 1 kHz

Preamplifier Stage Input Sensitivity

300 mV in for 1 V
Total Gain: 10 dB
Max Output: 7.5V

S/N Ratio - Line Inputs 1- 5

> 108 dB (shorted, IHF A-weighted)
> 88 dB (shorted, unweighted)

S/N Ratio - DAC Inputs

> 108 dB (IHF A-weighted)
> 88 dB (unweighted)

S/N Ratio Phono Input

MM > 80 dB (shorted, IHF A-weighted)
MM > 70 dB (shorted, unweighted)
MC > 67 dB (shorted, IHF A-weighted)
MC > 55 dB (shorted, unweighted)

Phono Stage Sensitivity / Input Impedance

MM: 38 dB / 47 k Ω
MC: 52 dB / 47 k Ω or 100 Ω

Input Impedance

Unbalanced: 24 k Ω
Balanced: 100 k Ω per leg

Preamplifier Output Impedance

Unbalanced: 100 Ω
Balanced: 470 Ω per leg

High & Low Pass Crossover Slope

12 dB per octave

Supported DAC Sampling Rates

USB: up to 384 kHz / 32-bit PCM
DSD Native: DSD 64, DSD 128, DSD 256
DSD over PCM (DoP) at 384 kHz
Coax/Optical: up to 192 kHz / 24-bit PCM

Digital to Analog Converter

ESS Sabre32 Reference ES9018K2M
384 kHz / 32-bit

USB 2.0 Controller

Savitech SA9227, 384 kHz / 32-bit

Headphone Amplifier

Texas Instruments TPA6120A
Output Impedance 10 ohms

XLR Pin Identification

1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Dimensions

Width: 17-1/4"
Depth: 15"
Depth, with cables 17"
Height, with feet: 4-1/8"
Height, without feet: 3-1/2", 2U

Net Weight

14 lb.

Shipping Weight

21 lb.

Power Requirement

Standby: 0.5 watts
Power On: 15 watts
100-250 VAC 50/60 Hz (automatic)10 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.5 dB

To learn more please contact us or visit https://parasound.com/p6.php

Parasound JC 3Jr.

$1,495.00

3 Ch Phono PreAmp

Frequency Response:

20-20Khz, +/- 0.2dB

Total Harmonic Distortion

< 0.02% at 1 kHz

Signal to Noise Ratio, 40 dB Setting

>85dB, input shorted, IHF A-weighted
>80dB, input shorted, unweighted

Signal to Noise Ratio, 50 dB Setting

>89dB, input shorted, IHF A-weighted
>84dB, input shorted unweighted

Signal to Noise Ratio, 60 dB Setting

> 94dB, input shorted, IHF A-weighted
> 91dB, input shorted, unweighted

Inter-channel Crosstalk

>80 dB at 1 kHz

Input Impedance

MM or MI: 47k Ω
MC Variable: 50- 550 Ω

Output Impedance

Unbalanced: < 100 Ω
Balanced: < 100 Ω per leg

Input Capacitance

150 pF

Input Sensitivity at 1 kHz, 4mV Input

40 dB: 4 mV for 450mV output
50 dB: 4 mV for 1.4 Volts output
60 dB: 4 mV for 4.25 Volts output

Input Sensitivity at 1 kHz, 1V Output

40 dB: 9 mV for 1.0 Volt output
50 dB: 3 mV for 1.0 Volt output
60 dB: 0.9 mV for 1.0 Volt output

Total Gain

40 dB / 50 dB / 60 dB (unbalanced output)
46 dB / 56 dB / 66 dB (balanced output)

XLR Pin Identification

1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

AC Power Requirement

Standby: <1 watt
Power On: 9 watts
115 VAC or 230 VAC 50 - 60 Hz

Dimensions

Width: 17-1/4”
Depth: 14-3/4”
Depth with cables: 17”
Height: 2-1/2”
Height, without feet: 1-3/4”

Weight

Net: 13 lbs.

Shipping:

19 lbs.

To learn more please contact us or visit https://parasound.com/jc3jr.php

Integrated Amplifiers

NAD M33

$4,999.00

2 Ch Integrated Amp

AMPLIFIER

Rated output power (ref. 20 Hz-20 kHz at rated THD, both channels driven

>200 W into 8 ohms
>380 W into 4 ohms

Rated output power, Bridge mode (ref. 20 Hz – 20 kHz at rated THD

>700 W into 8 ohms

Input sensitivity

865 mV (ref. 200W 8 ohms, Volume maximum)

THD (20 Hz – 20 kHz)

<0.003 % (1W to 200 W, 8 ohms and 4 ohms)

Signal-to-Noise ratio>98 dB (A-weighted, ref. 1 W out in 8 ohms)

>120 dB (A-weighted, ref. 200 W out in 8 ohms)

Clipping power

>210 W (0.1 % THD 1 kHz 8 ohms)

IHF dynamic power

8 ohms: 260 W
4 ohms: 520 W

Peak output current

≥25 A (in 1 ohm, 1 ms)

Damping factor

>800 (ref. 8 ohms, 20 Hz to 6.5 kHz)

Frequency response

±0.2 dB (20 Hz -20 kHz)
-3 dB at 60 kHz

PREAMPLIFIER

Line In

Input Impedance (r and c)

47kΩ/180pF

Input Sensitivity

280mV (ref. 500mV out, Volume Maximum)

Maximum input level 20Hz-20Khz

2 Vrms/8 Vrms (low sensitivity mode)

Tone Controls

Treble: ±10dB at 10kHz Bass: ±10dB at 100Hz

Max Output Signal

4Vrms (ref. 0.1% THD)

Preout

Maximum output level

3.9 Vrms (ref. 0.1% THD)

Signal-to-Noise ratio

>120 dB (A-weighted, ref. 2 V out)

Output impedance

100 ohms

Subout

Maximum output level

1.1 Vrms (ref. 0.1 % THD 100Hz)

Signal-to-Noise ratio

>102 dB (20 Hz-20 kHz, ref. 1V out)

THD+N

<0.005 % (refer 1.1 V 20 Hz-200 Hz)

Output impedance

680 ohms

PHONO

Input sensitivity

MM: 1.2 mV
MC: 100 µV

Input impedance (R and C)

MM: 56 kohms/100 pF
MC: 100 ohms/280 pF

Signal to noise ratio (ref. 2 V Preout A-weighted)

MM: >92 dB
MC: >76 dB

THD+N (ref 2V Preout 1kHz)

MM: <0.003 %
MC: <0.02 %

RIAA response accuracy MM/MC±0.2 dB 20 Hz -20 kHz

HEADPHONES

Output Impedance

2.2ohms

Output power

>100 mW/32 ohms

To learn more please contact us or visit https://nadelectronics.com/product/m33-bluos-streaming-dac-amplifier/

Parasound HINT 6

$2,995.00

2 Ch Integrated Amp

Power Output - Both channels driven

(0.9% THD, 20 Hz - 20 kHz)

180 watts x 2 @ 8 Ω RMS
270 watts x 2 @ 4 Ω RMS

Current Capacity

45 amps peak per channel

Frequency Response

10 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.5 dB

Total Harmonic Distortion (THD)

< 0.01 %, average listening levels
< 0.05 %, 160 watts x 2 @ 8 Ω

Interchannel Crosstalk

> 70 dB at 20 kHz
> 78 dB at 1 kHz

Signal to Noise Ratio - IHF A-weighted

Line in: - 103 dB (input shorted)
Digital in: - 106 dB

Amplifier Damping Factor

> 800 at 20 Hz

Preamplifier Stage Input Sensitivity

300 mV in for 1 V at Preamp Output jacks
Total Preamp Stage Gain: 10 dB
Max Output Unbalanced: 7 V
Max Output Balanced: 9 V

Power Amplifier Stage Sensitivity

1 V at Bypass/Amp In for 28 V at Speaker Out
Total Amp Stage Gain: 28 dB

Phono Stage Sensitivity / Input Impedance

MM: 41 dB / 47 k Ω
MC: 54 dB / 47 k Ω or 100 Ω

High & Low Pass Crossover Slope

12 dB per octave

Supported DAC Sampling Rates

USB: up to 384 kHz / 32-bit PCM
DSD Native: DSD 64, DSD 128, DSD 256
DSD over PCM (DoP) at 384 kHz

Coax/Optical:

up to 192 kHz / 24-bit PCM

Digital to Analog Converter

ESS Sabre32 Reference ES9018K2M
384 kHz / 32-bit

USB 2.0 Controller

Savitech SA9227, 384 kHz / 32-bit

Headphone Amplifier

Texas Instruments TPA6120A
Output Impedance 10 ohms

XLR Pin Identification

1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Input Impedance

Unbalanced: 24 k Ω
Balanced: 100 k Ω per leg

Preamplifer Output Impedance

Unbalanced: 100 Ω
Balanced: 470 Ω per leg

Dimensions

Width: 17-1/4"
Depth: 16-1/4"
Depth, with cables 17-1/4"
Height, with feet: 5-7/8"
Height, without feet: 5-1/4", 3U

Net Weight

33 lb.

Shipping Weight

45 lb.

Power Requirement

Standby: 0.5 watts
Idling power: 70 watts
Maximum: 750 watts
110-125 VAC 60 Hz or 220-250 VAC 50 Hz
AC mains voltage is set on rear panel

To learn more please contact us or visit https://parasound.com/hint6.php

NAD M10

$2,749.00

2 Ch Integrated Amp

Continuous output power into 8 ohms and 4 ohms

>100W (ref. 20 Hz-20 kHz at rated THD, both channels driven)

THD (20 Hz – 20 kHz)

<0.03 % (250 mW to 100 W, 8 ohms and 4 ohms)

Signal-to-Noise Ratio

>90 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)

Clipping power

>130 W (at 1 kHz 8 ohms 0.1 % THD)
>230 W (at 1 kHz 4 ohms 0.1 % THD)

IHF dynamic power8 ohms: 160 W

4 ohms: 300 W

Damping factor

>190 (ref. 8 ohms, 20Hz to 6.5kHz)

Frequency response

±0.6 dB (20 Hz – 20 kHz)

Tone controls

Treble: ±6.0 dB at 20 kHz
Bass: ±6.0dB at 60 Hz

Channel separation

>75 dB (1 kHz)
>70 dB (10 kHz)

Input sensitivity (for 100 W in 8 ohms)

Line In: 1.0 V
Digital In: -6.2 %FS

Standby power

0.5W

Dimensions (WxHxD)

8 1/2 x 3 15/16 x 10 1/4 inches

Shipping weight

11 lbs

To learn more please contact us or visit https://nadelectronics.com/product/m10-bluos-streaming-amplifier/

Stereo Power Amplifiers

NAD M22

$3,299.00

Stereo Power Amp

Continuous output power into 8 Ohms and 4 Ohms (Stereo)

>250W (at rated THD, 20Hz-20kHz, both channels driven)

THD+N 20Hz-20kHz, CCIF IMD, SMPTE IMD, DIM 100

<0.003% (250mW to rated power, 8 Ohms and 4 Ohms)

Clipping Power (8 Ohms)

>300W (at 1kHz 0.1% THD)

IHF Dynamic Power 8 Ohms

355W

4 Ohms

640W

2 Ohms

620W

Peak Output Current

>50A (ref. 1 Ohm, 1ms)

Signal/Noise Ratio, A-weighted, ref. 1W

>98dB

A-weighted, ref. rated power

>120dB

Damping Factor

>800 (ref. 8 Ohms, 50Hz and 1kHz)

Frequency Response

3Hz-30kHz (ref. -3dB)

Input Impedance RCA

17 kilohm + 200pF

XLR

200 kilohm + 100pF

Input Sensitivity

1.6V (ref. rated power)

Voltage Gain

29dB

Minimum Input Level for Auto Trigger

10mV at 1kHz

General

Standby Power

<0.5W

Idle Power

Dimension (WxHxD) 17 1/8 x 4 1/16 x 14 15/16 inches

Net weight 19.6lb

Shipping Weight1 33.1lb

To learn more please contact us or visit https://nadelectronics.com/product/m22-stereo-power-amplifier/

Parasound A 21+

$2,995.00

2 Ch Amp

Power Output – Stereo Mode (0.1% THD)

300 watts x 2, 8 Ω both channels driven
500 watts x 2, 4 Ω both channels driven

Power Output – Bridged Mode (0.1% THD)

1000 watts x 1, 8 Ω
Bridged 4 Ω operation is not recommended

Power measurement are at 120 VAC:

0.1% THD, RMS continuous power,
full audio band (20 Hz - 20 kHz)

Current Capacity

60 amps peak, per channel

Slew Rate

> 130 volts per microsecond

Frequency Response

5 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.25 dB

Total Harmonic Distortion (THD)

< 0.1 % at full power
< 0.03 % at typical listening levels

IM Distortion

< 0.04 %

TIM

Unmeasurable

Inter-channel Crosstalk

> 80 dB at 1 kHz
> 70 dB at 20 kHz

Input Impedance

Unbalanced: 33 kΩ
Balanced: 66 kΩ,(33 kΩ per leg)

Total Gain

29 dB

Input Sensitivity for 28.28 V Output into 8 Ω

Unbalanced: 1 V
Balanced: 1 V per leg

S/N Ratio

> 115 dB, input shorted, IHF A-weighted
> 110 dB, input shorted, unweighted

Damping Factor

> 1100 at 20 Hz

DC Trigger Requirements

+9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirements

2 mV - 10 mV

XLR Pin Identification

1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Dimensions

Width: 17-5/8"
Height without feet: 7-1/8"
Height with feet: 7-3/4"
Depth: 20"
Depth with cables: 21-1/2"

Net Weight

71 lb.

Shipping Weight

88 lb.

Power Requirement

Standby: 1 Watt
Idle (no music playing): 160 Watts
Typical Listening levels: 300 Watts
Maximum: 1400 Watts

To learn more please contact us or visit https://parasound.com/a21+.php

Sonance DSP 2-750

$1,800.00

2 Ch Amp

Output Power - 8 Ohms 500 Watts RMS per Channel (Both Channels Driven)
Output Power - 4 Ohms 750 Watts RMS per Channel (Both Channels Driven)
Output Power - 8 Ohms (Bridged) 2000 Watts
Output Power - 70 Volts 750 Watts RMS per Channel (Both Channels Driven)
Frequency Response 5Hz - 50kHz
Operating Voltage 100 - 120V@60Hz, 220 - 240V@50Hz
Rack Space Requirement 2U
Dimensions With Feet (WxHxD) 17 1/4" x 3 7/8" x 17 7/32"
Rack Mounted Dimensions (WxHxD) 19" x 3 1/2" x 17 7/32"
Shipping Weight 23.3 lbs

To learn more please contact us or visit https://www.sonance.com/electronics/amplifiers/dsp

Parasound A 23+

$1,595.00

2 Ch Amp

Power Output – Stereo Mode (0.06% THD)

160 watts x 2, 8 Ω both channels driven
240 watts x 2, 4 Ω both channels driven

Power Output – Stereo Mode (0.9% THD)

210 watts x 2, 8 Ω both channels driven
300 watts x 2, 4 Ω both channels driven

Power Output – Bridged Mode (0.06% THD)

500 watts x 1, 8 Ω
Bridged 4 Ω operation is not recommended

Power Output – Bridged Mode (0.9% THD)

600 watts x 1, 8 Ω
Bridged 4 Ω operation is not recommended

*All Power measurement are at 120 VAC,

RMS continuous power, full audio band (20 Hz - 20 kHz)

Current Capacity

45 amps peak, per channel

Slew Rate

> 130 volts per microsecond

Frequency Response

5 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.25 dB

Total Harmonic Distortion (THD)

< 0.06 % at full power
< 0.03 % at typical listening levels

IM Distortion

< 0.04 %

TIM

Unmeasurable

Inter-channel Crosstalk

> 85 dB at 1 kHz
> 70 dB at 20 kHz

Input Impedance

Unbalanced: 33 kΩ
Balanced: 66 kΩ,(33 kΩ per leg)

Total Gain

29 dB

Input Sensitivity for 28.28 V Out (8 Ω Load)

Unbalanced: 1 V
Balanced: 1 V per leg

S/N Ratio

> 112 dB, input shorted, IHF A-weighted
> 107 dB, input shorted, unweighted

Damping Factor

> 800 at 20 Hz

DC Trigger Requirements

+9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirements

2 mV - 10 mV

XLR Pin Identification

1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Dimensions

Width: 17-1/4"
Depth: 15"-1/4"
Depth, with cables 17"
Height, with feet: 4-1/8"
Height, without feet: 3-1/2", 2U

Net Weight

27 lb.

Shipping Weight

34 lb.

Power Requirement

Standby: <1 Watt
Idle (no music playing): 75 Watts
Typical Listening levels: 125 Watts
Maximum: 800 Watts
110-125 VAC 60 Hz or 220-250 VAC 50 Hz
AC mains voltage is set on rear panel

To learn more please contact us or visit https://parasound.com/a23+.php

Sonance DSP 2-150

$1,075.00

2 Ch Amp

Output Power - 8 Ohms 150 Watts RMS per Channel (Both Channels Driven)
Output Power - 4 Ohms 224 Watts RMS per Channel (Both Channels Driven)
Output Power - 8 Ohms (Bridged) 473 Watts
Frequency Response 5Hz - 50kHz
Operating Voltage 100 - 120V@60Hz, 220 - 240V@50Hz
Rack Space Requirement 1U 1/2 Rack Width
Dimensions With Feet (WxHxD) 8 5/8" x 2 1/8" 16 13/16"
Rack Mounted Dimensions (WxHxD) 8 5/8" x 1 3/4" 16 13/16"
Shipping Weight 11 lbs

To learn more please contact us or visit https://www.sonance.com/electronics/amplifiers/dsp

Sonos Amp

$700.00

2.1 Ch Amp

Bring the Sonos experience to your floor-standing, in-wall, in-ceiling, outdoor, and bookshelf speakers with Amp

Dimensions (HxWxD) 2.52 x 8.54 x 8.54 inches

To learn more please contact us or visit https://www.sonos.com/en-us/shop/amp.html

Multi-Channel Amplifiers

Parasound A 51

$4,995.00

5 Ch Amp

Continuous power output:

250 watts RMS x 5, 20 Hz - 20 kHz, 8 Ω, all channels driven
400 watts RMS x 5, 20 Hz - 20 kHz, 4 Ω, all channels driven

Current capacity:

60 amperes peak per channel

Power bandwidth:

5 Hz - 100 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:

< 0.2 % at full power

IM distortion: balanced 16 V rms

< 0.04 %

Slew rate:

> 130 V/µsecond

Dynamic headroom:

> 1.5 dB

Interchannel crosstalk:

> 78 dB at 1 kHz;
> 63 dB at 20 kHz

Input sensitivity:

1 V for 28.28 V, THX Reference Lev

Input impedance:

47 k Ω unbalanced; 94 k Ω balanced

S/N ratio:

112 dB, input shorted, IHF A-weighted

Damping factor:

> 1100 at 20 Hz

Voltage:

110V - 120V

Dimensions (WxHxD):

17-1/2" x 7-5/8" x 20", 7" h without feet

Net weight:

80 lb.

To learn more please contact us or visit https://parasound.com/a51.php

Parasound A 31

$3,495.00

3 Ch Amp

Continuous power output:

250 watts RMS x 3, 20 Hz - 20 kHz, 8 Ω, all channels driven
400 watts RMS x 3, 20 Hz - 20 kHz, 4 Ω, all channels driven

Current capacity:

60 amperes peak per channel

Power bandwidth:

5 Hz - 100 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:

< 0.2 % at full power

IM distortion: balanced 16 V rms

< 0.04 %

Slew rate:

> 130 V/µsecond

Dynamic headroom:

> 1.5 dB

Interchannel crosstalk:

> 78 dB at 1 kHz;
> 63 dB at 20 kHz

Input sensitivity:

1 V for 28.28 V (THX Reference)

Input impedance:

47 k Ω unbalanced; 94 k Ω balanced

S/N ratio:

112 dB, input shorted, IHF A-weighted

Damping factor:

> 1100 at 20 Hz

Dimensions (WxHxD):

17-1/2" x 7-5/8" x 20", 7" h without feet

Net weight:

65 lb.

Shipping weight:

79 lb.

To learn more please contact us or visit https://parasound.com/a31.php

Parasound A 52+

$2,995.00

5 Ch Amp

Power Output - All 5 Channels Driven

180 watts x 5, 8 Ω
255 watts x 5, 4 Ω

Power Output - 2 Channels Driven

225 watts x 2, 8 Ω
350 watts x 2, 4 Ω

Power measurements parameters with 120VAC

0.05% THD, RMS continuous power,
full audio band (20 Hz - 20 kHz)

Current Capacity:

45 amperes peak, per channel

Dynamic Headroom:

>1.5dB

Slew Rate

> 130 volts per microsecond

Frequency Response

5 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.3 dB

Total Harmonic Distortion (THD)

< 0.05 % at full power
< 0.03 % at typical listening levels

IM Distortion

< 0.04 %

TIM

Unmeasurable

Interchannel Crosstalk

> 78 dB at 1 kHz
> 63 dB at 20 kHz

Input Impedance

Unbalanced: 47 kΩ
Balanced: 94 kΩ, 47 kΩ per leg

Input Sensitivity for 28.28 V Output into 8 Ω

Unbalanced: 1 V
Balanced: 1 V per leg
Total Gain: 29 dB

S/N Ratio

> 112 dB, input shorted, IHF A-weighted
> 102 dB, input shorted, unweighted

Damping Factor

> 1100 at 20 Hz

DC Trigger Requirements

+9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirements

2 mV - 10 mV

XLR Pin Identification

1 = Ground (Shield)
2 = Positive
3 = Negative (Return)
Dimensions
Width: 17-1/4"
Height without feet: 5-1/4"
Height with feet: 5-7/8"
Depth: 20"
Depth with cables: 21-1/4"

Net Weight

55 lb.

Shipping Weight

69 lb.

Power Requirement

Standby: 1 Watt
Idle: 125 Watts
Maximum: 1500 Watts

To learn more please contact us or visit https://parasound.com/a52+.php

Sonance DSP 8-130

$3,275.00

8 Ch Amp

Output Power - 8 Ohms 130 Watts RMS (All Channels Driven)
Output Power - 4 Ohms 145 Watts RMS (All Channels Driven)
Output Power - 70 Volts 300 Watts
Frequency Response 5Hz - 50kHz
Operating Voltage 100 - 120V@60Hz, 220 - 240V@50Hz
Rack Space Requirement 1U
Dimensions With Feet (WxHxD) 17 1/4" x 2 1/8" x 16 13/16"
Rack Mounted Dimensions (WxHxD) 19" x 1 3/4" x 16 13/16"
Shipping Weight 18 lbs

To learn more please contact us or visit https://www.sonance.com/electronics/amplifiers/dsp

LEA 168

$3,435.00

8 Ch Amp

8 x 160 WRMS @ 4Ω, 8Ω, 70V, 100V (80W at 2Ω)

Web Browser-based UI – works on any device with no software to download
Direct LoZ and HiZ (70V or 100V) selectable per channel
Proprietary Smart Power Bridge allows user to bridge a channel to achieve double the power of that channel without sacrificing an amplifier channel
3 Ways to Connect 1.) Built in WiFi Access Point 2.) Connects to existing WiFi network 3.) Local Area Network Ethernet connection
96kHz Analog Devices DSP with Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user configurable speaker limiters, and real time load monitoring
Universal Switch Mode Power Supply with PFC. Operation from 100VAC – 240VAC +/-15%
Analog fully routable inputs
External I/O Port for Remote On/Off and fault monitoring
Highly Efficient Class D Output Stage for low AC Current draw

To learn more please contact us

LEA 704

$3,245.00

4 Ch Amp

4 x 700 WRMS @ 4Ω, 8Ω, 70V, 100V (350W at 2Ω)

Inputs: Balanced analog Inputs with user selectable 26 dB and 34 dB input sensitivity
THD+N: 0.1% (20Hz to 20kHz)
Frequency Response: +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
Signal to Noise Level: 105dB (20Hz to 20kHz referenced to 8Ω)
Crosstalk: 70dB (20Hz to 20kHz)
I/O Latency: 1 ms DSP latency under any condition
Load Impedance: LowZ down to 2 ohms, 70V direct, and 100V Direct per channel
Amplifier Output Classification: Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality
without sacrificing an amplifier channel
DC Offset: +/- 3mV

To learn more please contact us

Episode EA-RSP-16D-100

$2,970.00

16 Ch Amp

Impedance Input RCA analog input: 20kΩ
Power Output @ 4 ohm 2 channels driven: 2x100W 1 kHz All Channels: 16x80W 1 kHz
Power Output @ 8 ohm 2 channels driven: 2x50W 1 kHz All Channels: 16x80W 1 kHz
Power Output Bridged @ 8 ohm 8x160W 1 kHz
Sensitivity Input 1 Vrms
Total Harmonic Distortion (THD) 0.01% 1 kHz @1/8 rated power 4Ω or 8Ω
Frequency Response 20 Hz - 20 kHz < ± 2 dB
Dimensions (WxHxD) 19 × 16.7 × 3.5 inches
Power Consumption 1600W
Weight 20.9 lbs
Signal to Noise Ratio >95 dB A-weighted @ rated power
Nominal Impedance 1 ohm

To learn more please contact us

Episode EA-RSP-12D-100

$2,565.00

12 Ch Amp

Impedance Input RCA analog input: 20kΩ
Power Output @ 4 ohm 2 channels driven: 2x100W 1 kHz All Channels: 12x85W 1 kHz
Power Output @ 8 ohm 2 channels driven: 2x50W 1 kHz All Channels: 12x85W 1 kHz
Power Output Bridged @ 8 ohm 1 × 400W 1 kHz
Sensitivity Input 1 Vrms
Total Harmonic Distortion (THD) 0.01% 1 kHz @1/8 rated power 4Ω or 8Ω
Frequency Response 20 Hz - 20 kHz < ± 2 dB
Dimensions (WxHxD) 19 × 16.7 × 3.5 inches
Power Consumption 1200W
Weight 19.8 lbs
Signal to Noise Ratio >95 dB A-weighted @ rated power
Nominal Impedance 1 ohm

To learn more please contact us

Episode EA-RSP-8D-100

$2,160.00

8 Ch Amp

Impedance Input RCA analog input: 20kΩ
Power Output @ 4 ohm 2 channels driven: 2x100W 1 kHz All Channels: 8x100W 1 KHz
Power Output @ 8 ohm 2 channels driven: 2x50W 1 kHz All Channels: 8x50W 1 KHz
Power Output Bridged @ 8 ohm 4 x 200W 1 KHz
Sensitivity Input 1 Vrms
Total Harmonic Distortion (THD) 0.01% 1 kHz @1/8 rated power 4Ω or 8Ω
Frequency Response 20 Hz - 20 kHz < ± 2 dB
Dimensions (WxHxD) 19 × 16.7 × 3.5 inches
Power Consumption 800W
Weight 18.7 lbs
Signal to Noise Ratio >95 dB A-weighted @ rated power
Nominal Impedance 1 ohm

To learn more please contact us

Sonance 12-50

$1,500.00

12 Ch Amp

Output Power - 8 ohms 50 Watts (12 channels driven)
Output Power - 4 ohms 50 Watts (12 channels driven)
Output Power - 8 ohms (Bridged) 100 Watts
Frequency Response 5Hz - 50kHz
Operating Voltage 100-120V @60Hz, 220-240V @50Hz
Rack Space Requirement 2U
Dimensions With Feet (WxHxD) 17 1/4" x 3 7/8" x 16 13/16"
Rack Mounted Dimensions (WxHxD) 19" x 3 1/2" x 16 13/16"
Shipping Weight 20 lbs

To learn more please contact us or visit https://www.sonance.com/electronics/amplifiers/digital

Sub-Woofer Amplifiers

Sonance DSP 2-750

$1,800.00

2 Ch Amp

Output Power - 8 Ohms 500 Watts RMS per Channel (Both Channels Driven)
Output Power - 4 Ohms 750 Watts RMS per Channel (Both Channels Driven)
Output Power - 8 Ohms (Bridged) 2000 Watts
Output Power - 70 Volts 750 Watts RMS per Channel (Both Channels Driven)
Frequency Response 5Hz - 50kHz
Operating Voltage 100 - 120V@60Hz, 220 - 240V@50Hz
Rack Space Requirement 2U
Dimensions With Feet (WxHxD) 17 1/4" x 3 7/8" x 17 7/32"
Rack Mounted Dimensions (WxHxD) 19" x 3 1/2" x 17 7/32"
Shipping Weight 23.3 lbs

To learn more please contact us or visit https://www.sonance.com/electronics/amplifiers/dsp

Episode EA-AMP-SUB-1D-500R

$1,383.00

1 Ch Amp

Impedance Input 15.000 ohms
Power Output @4 ohm 500W RMS
Power Output @8 ohm 250W RMS
Sensitivity Input 100 mV for 500W output 4 ohms
Total Harmonic Distortion (THD) < 0.2%
Frequency Response "1.1 db at 300 Hz (Flat EQ, LFE Crossover Setting) 1.5 dB at 20 Hz"
12V Trigger 2.6V
Certifications TUV listed Tested under UL/EN60065 for US and Canada
Dimensions (WxHxD) 16.9" x 1.75" x 8.1
Weight 8.5 lb
Rack Spacing 1U
Signal to Noise Ratio 88 dB (5 kHz bandwidth relative to 500W @ 4 ohms)
External Trigger Voltage 12V +/-1.2V no load 10.5 V with 100 mA load

To learn more please contact us

KEF KASA500

$1,100.00

2 Ch Amp

Amplifier Power (<1% THD)

2 x 250watts 4ohms
Bridge 1 x 500watts 8ohms

Crossover Frequency

40-140Hz or software bypass

Inputs

Selectable stereo RCA line level, or mono LFE RCA level; Stereo speaker level

12-Volt trigger input voltage

8 to 14 Volt DC@1.5mA max ⅛"diameter female plug (tip positive or tip negative)

External Dimensions

3½ x 17 x 12 inches

External Dimensions w/feet (HxWxD)

3⅝ x 17 x 12 inches

External Dimensions w/rack ears; 2 EIA rack space (HxWxD)

3½ x 19 x 12 inches

Weight

9 lbs

To learn more please contact us or visit https://us.kef.com/kasa500-subwoofer-amplifier.html

Please Note: Cagenio does not sell anything online and the shopping cart does not function. Most products, Control4 in particular, must be installed and configured by Cagenio.

Cagenio is proud to be an Authorized Dealer for Classé, Parasound, NAD, Sonance, KEF, LEA and Episode