NAD M33
2 Ch Integrated Amp
AMPLIFIER
Rated output power (ref. 20 Hz-20 kHz at rated THD, both channels driven
- >200 W into 8 ohms
- >380 W into 4 ohms
Rated output power, Bridge mode (ref. 20 Hz – 20 kHz at rated THD
- >700 W into 8 ohms
Input sensitivity
- 865 mV (ref. 200W 8 ohms, Volume maximum)
THD (20 Hz – 20 kHz)
- <0.003 % (1W to 200 W, 8 ohms and 4 ohms)
Signal-to-Noise ratio>98 dB (A-weighted, ref. 1 W out in 8 ohms)
- >120 dB (A-weighted, ref. 200 W out in 8 ohms)
Clipping power
- >210 W (0.1 % THD 1 kHz 8 ohms)
IHF dynamic power
- 8 ohms: 260 W
- 4 ohms: 520 W
Peak output current
- ≥25 A (in 1 ohm, 1 ms)
Damping factor
- >800 (ref. 8 ohms, 20 Hz to 6.5 kHz)
Frequency response
- ±0.2 dB (20 Hz -20 kHz)
- -3 dB at 60 kHz
PREAMPLIFIER
Line In
Input Impedance (r and c)
- 47kΩ/180pF
Input Sensitivity
- 280mV (ref. 500mV out, Volume Maximum)
Maximum input level 20Hz-20Khz
- 2 Vrms/8 Vrms (low sensitivity mode)
Tone Controls
- Treble: ±10dB at 10kHz Bass: ±10dB at 100Hz
Max Output Signal
- 4Vrms (ref. 0.1% THD)
Preout
Maximum output level
- 3.9 Vrms (ref. 0.1% THD)
Signal-to-Noise ratio
- >120 dB (A-weighted, ref. 2 V out)
Output impedance
- 100 ohms
Subout
Maximum output level
- 1.1 Vrms (ref. 0.1 % THD 100Hz)
Signal-to-Noise ratio
- >102 dB (20 Hz-20 kHz, ref. 1V out)
THD+N
- <0.005 % (refer 1.1 V 20 Hz-200 Hz)
Output impedance
- 680 ohms
PHONO
Input sensitivity
- MM: 1.2 mV
- MC: 100 µV
Input impedance (R and C)
- MM: 56 kohms/100 pF
- MC: 100 ohms/280 pF
Signal to noise ratio (ref. 2 V Preout A-weighted)
- MM: >92 dB
- MC: >76 dB
THD+N (ref 2V Preout 1kHz)
- MM: <0.003 %
- MC: <0.02 %
RIAA response accuracy MM/MC±0.2 dB 20 Hz -20 kHz
HEADPHONES
Output Impedance
- 2.2ohms
Output power
- >100 mW/32 ohms
To learn more please contact us or visit https://nadelectronics.com/product/m33-bluos-streaming-dac-amplifier/
| nad-m33-data-sheet.pdf |