Parasound JC 5
SKU:
$5,995.00
$5,995.00
per item
2 Ch Stereo Amp
Power Output – Both Channels Driven
- 400 watts x 2, 8 Ω
- 600 watts x 2, 4 Ω
Power Output – Bridged Mode
- 1200 watts x 1, 8 Ω
- Bridged 4 Ω operation is not recommended
Power measurement parameters are at 120 VAC:
- 0.05% THD, RMS continuous power,
- full audio band (20 Hz - 20 kHz
Current Capacity
- 90 amps peak, per channel
Slew Rate
- > 130 volts per microsecond
Frequency Response
- 5 Hz - 100 kHz, +0/-3 dB
- 20 Hz - 20 kHz, +0/-0.25 dB Total Harmonic Distortion (THD)
- < 0.05 % at full power
- < 0.03 % at typical listening levels IM Distortion
- < 0.04 %
TIM
- Unmeasurable
Inter-channel Crosstalk
- > 87 dB at 1 kHz
- > 72 dB at 20 kHz
Input Impedance
- Unbalanced: 33 kΩ
- Balanced: 66 kΩ,(33 kΩ per leg)
Total Gain
- 29 dB
Input Sensitivity for 28.28 V Output into 8 Ω
- Unbalanced: 1 V
- Balanced: 1 V per leg
S/N Ratio
- > 116 dB, input shorted, IHF A-weighted
- > 111 dB, input shorted, unweighted Damping Factor
- 1000 at 20 Hz DC Trigger Requirements
- +9 Vdc to +12 Vdc, 5 mA
Audio Trigger Requirements
- 2 mV - 10 mV
XLR Pin Identification
- 1 = Ground (Shield)
- 2 = Positive
- 3 = Negative (Return)
Dimensions
- Width: 17-5⁄8"
- Height without feet: 7-1⁄8"
- Height with feet: 7-3/4"
- Depth: 20"
- Depth with cables: 21-1⁄2"
Net Weight
- 73 lb.
Shipping Weight
- 90 lb.
Power Requirement
- Standby: 1 Watt
- Idle (no music playing): 225 Watts
- Typical listening levels: 400 Watts
- Maximum: 1500 Watts
To learn more please contact us or visit https://parasound.com/jc5.php
| jc5-brochure.pdf |